As an advanced high-performance servo motor, the AC permanent magnet synchronous servo motor of Ultract HX series can satisfy the extensive needs of industrial automation and process control, especially suitable for the application scenarios of direct drive.

    Ultract HX series AC permanent magnet synchronous servomotor has high torque/ volume ratio and power/volume ratio and is equipped with optical or inductive encoder. As a standard feedback device of servomotor, this encoder can provide the absolute position encoding of 8 million points per turn. Therefore, it has the best stability with extremely low speed of servomotor. Or you can choose multi-ring absolute encoder with Endat interface and electronic nameplate. Based on above characteristics, it can overcome the limitations of mechanical driving device and make numerous application scenarios completely adopt direct drive technology.

    Ultract HX series AC permanent magnet synchronous servomotor, from the smallest No.3 base to the largest No.18 base, covers a total of six series. The pull-in torque of No.3 base servomotor is 2NM, suitable for chassis with the flange dimension of 75mm, used for minimal localization and the installation of small parts, and able to replace DC and stepping motor; the large servomotor of No.13 base, with the power of 200KW and the maximum torque of 700NM, suitable for direct and distributed driving on the continuous production line, so as to overcome the continuous power consumption of long distance transmission link. The standards are 220/240Vac or 380/460Vac. The input voltage of No.10 and No.13 base servomotor is 380/440Vac. At the same time, there are choices of natural cooling, forced air cooling and water cooling. With the features of low rotational inertia, high accuracy and fast response, etc., Ultract HX series are suitable for scenarios of direct or distributed driving on the continuous production line, so as to overcome the continuous power consumption of long distance transmission chains.